What is the Navcore appllication for my TOM TOM 903

What is the latest version of Navcore appllication for my TOM TOM 930 ?

Where is the url which I can download it ?

Thanks.

I'll assume you mean 930.

The latest (though 19 months old!!!) is 8.351 and can be dl here

Yes it is the 930.
So I have a 8 gb. sd card now and wish to operate from
my new sd. What do I have to do to make it read everything from my new sd card with 8.351 version?
Since the internal memory is small it doesn't fit all the North America and Europe maps after updated over a year ago.

I will extract all the files from 8.351 Navcore cab to my new sd card and copy the back up folders for Northamerica and Europe maps from old sd card to new.
What other folders should I copy from my old sd card to new one ? Like saved waypoints and POI etc..

It should work after the copy all these to sd card and boot up my Tom Tom 930 from sd card with 8.351 Navcore version?

Thanks.

I'm surprised everything didn't fit with the upgrades a year ago.

Be that as it may, if you extract the 8.351 cab file to the sdhc card, then the unit will bott from there. Then you can copy the NA and European maps there as well.

Your custom poi files are in the specific map folder as are your favourites in the mapsettings.cfg file

The V840 maps for Western_Europe which is around 12 months old had ballooned to 2,07GB and this was enough to take it above the available storage capacity for all the necessary files and both sets of maps.

Even when released the 930 was rather short of spare capacity.

To be honest I would leave the Navcore and all other files folders on the device memory and simply put the map folders on the SDHC card, its much easier and won't affect the way the device works as it shares the two memory locations (internal Flash memory and external storage card) simultanously - Mike

So it will work with just the 2 folder maps on my new sd card ?

Thanks.

Yes, and that is the easiest way to acheive what you want, as it saves moving loads of other files and folders from the internal memory to the SDHC - Mike

I wanted Kate's voice (British accent voice)

At the moment it is in LoquendoTTS folder in SD card, just have that voice (files) in that folder.

But when I choose her voice it wouldn't work, just the voices
of Susan English u.s., Spain Soledad, and French Canada
works when I change to their voices. The voices which work
are in LoquendoTTS folder in internal memory.

So how I can make it so all the voices will work whatever I choose ?

I suspect it is not working since I didn't copy all the files need from old sd card which had some files for changing voices to make it work ?

Thanks.

FWIW, if Home thinks it sees the Kate voice, I'd use Home to delete that voice, then using Home's feature for "Add Traffic, Voices, Safety Cameras, etc..", go ahead and download it again.

For whatever reason, Loquendo voices on a sd card do not work with units that do have sd slots. All computer voices should reside on internal storage.